COCKTAILS DISPENSER - JUNIOR
User manual and instructions for use
- ①. Hygienic technology, separate tubes, residue-free and easy to clean
- ②. Mixing speed, mix a cocktail in 5-10 seconds.
- ③. You can use carbonated juices, such as Coca Cola, Sprite, mineral water, etc - WITHOUT PROSSECO
- ④. You can use juices, syrups and any other commercial liquid drinks.
- ⑤. Control panel and voice control mixing.
- ⑥. Aluminum alloy outer casing.
- ⑦.Built-in 12V lithium battery capacity 5500 mAh, 24 hours stand-by can mix about 40-50 drinks, outdoor use, camping, on terraces, gazebos, places without a source of electricity, etc.
Diameter: 315mm
Height: 395mm
Weight: 4 kg

DR. DRINK
1. Introduction
The Junior cocktail dispenser adopts the same new technology to mix a cocktail in a few seconds, 5 bottles with ingredients, 5 tubes and separate pumps for each, which dispenses with the same milliliter precision, it holds 15 sets of 15-20 recipes each cocktail. The ingredients in the recipes cannot be modified, but from our experience we have chosen very common combinations of raw materials known and available to anyone (eg: Tequilla, Rum, Vodka, Grenadine, Orange) to which you can change the amount in the final drink. The dispenser adopts the same principle of liquid release by pumping air into the bottles.
2.1. The location for mounting the bottles and the exit of the cocktail.

Control panel
Cocktail output
Glass holder
Bottle positions
- W: 365 mm
- L: 428 mm
- H: 535 mm
- Greutate: 20 kg
- Carcasa din otel





2.2: Assembly and use of bottle sleeves:
Mounting the bottle with ingredients upside down on the cocktail machine is a classic method in the field. We have three types of sleeves or heads for bottles. One is a bottle sleeve used for bottled drinks, suitable for most glass bottles on the market -Fig4. Another type is the bottle head used for drinks bottled in PET plastic -Fig5, which can be adapted to some drinks bottled in plastic. The third type is a stainless steel bottle head suitable for 1.75-2 l plastic bottles for carbonated juices.

Glass bottle head:Suitable for most beverage bottles on the market

Plastic bottle head: suitable for most PET juice bottles

Plastic bottle head with stainless steel thread for 1.75-2Lcarbonated water.
Figures 7, 8 show the assembled bottle heads.


Figures 10 and 11 the sleeves can be opened for cleaning.




Fig 13 Sleeve core valve
The sleeve core has two functions Fig 13; It prevents the liquid from leaking when the bottle is turned over and by pumping air into the bottle it allows the release of the liquid in the device.
2.3: Tips for assembling the bottle sleeve
The neck of the bottle must fit perfectly with the sleeve to seal perfectly. For an unknown beverage bottle, you can first try inserting the core of the bottle head into the mouth of the bottle as shown in Fig 15. If it feels too tight and cannot be fully inserted, you can use scissors to cut one of the silicone rings from the core of the bottle head as shown in fig. 16, to leave only two rings for the glass, as shown in fig. 17.



The core and head of the bottle must be firmly fixed. Before inserting into the bottle, the core of the silicone head should be gently seated, as shown in Figure 18, so that the silicone valve covers the head of the tube to prevent leakage when the bottle is mounted. Insert it into the bottle with a slight force and see if it is seated correctly. Install a specific glass head and make sure it does not leak when it is turned upside down. Then, when you insert it into the machine, align with the center of the slot vertically, and with a slight force to insert the bottle upside down, hold the sleeve of the bottle with one hand, rotate 90 degrees clockwise, and fix the bottle like this as shown in Figure 20 and Figure 21.




2.4: Installing the special stainless steel glass head for Coca Cola, Sprite etc.
Carbonated drinks usually refer to Coca-Cola, Sprite, Seven Up or any configuration of drinks that contain 2L bottled gas.
Plastic bottles for drinks that contain gas have pressure inside, which requires better sealing of the bottle mouth, and we need to use the stainless steel threaded sleeve. See Figures 22 and 23.


The traditional technology of using pumps to draw carbonated juices from the bottle cannot be used because using pumps sucks out all the bubbles. From a professional perspective, this is not possible, changing the taste of the final product, which is a disadvantage of pump suction technology. Our cocktail machine adopts air pressure glass liquid extraction technology, which can handle fizzy drinks without sucking bubbles. This will press the drink and gas together, resulting in a drink that contains gas and doesn't change the taste of the final drink much. This is a major advantage of this cocktail device.
2.5: The settings for the use of drinks containing gas are presented in point 3.8.
2.6: Precautions for the use of beverages containing CO2:
2.6.1: Prepare the bottle head in advance and use the special stainless steel threaded head
După deschiderea sticlei de băutură gazoasă, introduci mansonul in sticla cât mai repede posibil. La introducere roteste încet în direcția inversa. Când auzi sau simti un „click”, acesta indică faptul că dinții filetului sunt aliniați. Apoi, cu puțină forță pentru il rotesti în direcția normală și strângeți-l până la capăt. Dacă este aliniat greșit sau se aplică o forță neuniformă, pot cauza scurgeri.
2.6.2: It is recommended to use 1.5-1.7L bottles of Cola or Sprite, etc
Once the bottle head is installed and inserted into the dispenser, the juice must be consumed. It should not be removed halfway, as the bottle is inserted upside down, and the full amount of gas will not escape until the bottle is finished. Removing the bottle halfway will result in the loss of gas and liquid, by changing the pressure resulting in less juice at the end.
2.6.3: Do not use triangular or round-bottomed glasses for carbonated cocktails
Carbonated drinks come out with pressure and can easily flow out of the glass; Use a tall, flat-bottomed glass.

2.6.4: PLEASE NOTE
Drinks containing CO2 such as Cola and Sprite can only be placed in position 2. Carbonated drinks cannot be placed in other bottle positions!
2.6.5: The sealing ring on the head of the fizzy drink bottle is easy to detach
There is a spare sealing ring in the accompanying accessories. Please note that without this sealing ring, leakage is possible as shown in the following figure:

2.7: Introduction to the control panel
3. Use of the cocktail device - JUNIOR
3.1. Access to the bartending interface


Press “↔” to switch between cocktails and single drinks.
Press “🎤" for the name of the recipe.
Press “🆗” to serve
3.2. Description and commands of the buttons:


Press "↰" to return.
3.3. Selection of recipe sets
We have several different recipe combinations, which can be modified according to your preferences:


Press “🆗” to confirm.


Press“↓” or “↑” to change ingredients.
Long press “🎤" to modify settings.
Press “🆗” to save the modified quantity.
3.5: Changing the quantity for "single drink"

Press “🆗” and enter the mixing interface.


Long press “🎤" to save changes.
Press “🆗” for mixing the modified recipe.
3.6. Modification and registration of unset recipes
After the normal recipes, there are recipes numbered from 1 to 10. The quantities of ingredients in the recipes can be changed but their names cannot be changed.




Pressing "↰" you pump 100ml and check the quantity, with “🔊-” “🕑” pump 50ml and check, with “🎤" pump 20ml and check, with “🔊+” “🕑” pump 10ml and check.
Calibration process can be repeated. Press “🆗” to save.
3.8. Use of carbonated drinks
Juices containing gas such as Cola, Sprite, etc. can be attached to the JUNIOR cocktail dispenser.
We suggest using drinks from 1.75 or 2 liter bottles.
Before setting the "gas content coefficient of the channel", use a special stainless steel threaded head and install it on the mouth of the juice bottle as described in section 2.4. Next, insert the bottle into position 2.


Press "↰" and pump 100ml
Press “🔊-🕑” and pump 50ml
Press “🎤" and pump 20ml
Press “🔊+🕑” and pump 10ml
Calibration can be repeated.
Press “🆗” to save changes.
3.9. Clock setting


Press “🔊+” “🕑” for forward.
Press “🎤" for return.
3.10. Washing the device
We give as an example the washing of position 1:
3.10.1 Normal washing


Press “🆗” to start washing.
Press "↰" for back or exit.

2. Place the glass for emptying.
3. a cup with 150 milliliters of water.
4. Insert the dedicated washing tube into the cleaning hole no. 1 and the other end into the emptying cup.
3.10.2 : Disinfection
Use water-soluble chloramine tablets - they are not included in the package:

Chloramine tablets are in the form of pills and should be used once every two to three months. They have a broad spectrum of action: bactericidal, fungicidal, virucidal, mircobactericidal, tuberculocidal, sporicidal and easily remove juice residues from pipes with a sterilization efficiency of 99.99%.
Sterilization method: Dissolve 1 tablet in 2 L of water, pour into a glass bottle, install the bottle sleeve, and mount it in the bottle slot on the cocktail dispenser, activate the available wash function and let the tube fill with the water. Thus, leave the disinfection water on the pipe to act for a few hours (or overnight), then with a bottle of clean water in the bottle compartment, start the normal washing program and remove the disinfection solution.
What are the differences between the two cleaning methods? The first cleaning method is to clean both the liquid and air lines. It is recommended to use this cleaning method especially for syrup or juice channels. The second method is the most thorough cleaning, which can clean the residue on the inner wall of the pipe for disinfection and sterilization. It is recommended to use the first method for regular cleaning, and the second method every two or three months (depending on the time of use) to disinfect and sterilize the pipe.
4. Using the cocktail device by voice control
4.1: Features of voice control:
4.1.1: This offline voice control device is totally different from similar products on the market and cannot be compared.
4.1.2: Voice command requires accurate pronunciation for recognition
otherwise errors may occur. The voice module has sound requirements, with different recognition rates for male, female, child, high and low voices. It is recommended to try several times to find and learn the right tonality.
4.1.3: In noisy environments, the effectiveness of voice control is affected.
4.2: The voice control mode consists of several parts:
Wake-up words/command words/affirmative word.
4.3: Learning wake-up words:
This dispenser is equipped with several wake-up words, and you can learn the pronunciation of the wake-up words in the following interface.


Press “↓” “↑” to move.
Press “🎤" next to each line to hear the pronunciation.
Press “🆗” to exit.
4.4: Learning command words;
The template for the local command word is:
“make a cup with...“

Press “🎤" to hear and learn the pronunciation of the command word.
4.5: Awakening

4.6: Voice commands:
4.6.1: Voice command for "Tequila sunrise" cocktail
Example:
Wake-up words: Cocktail Machine
Cocktail machine will answer: Hey, I'm here.
Command words make a cup of Tequila Sunrise:
Cocktail machine will answer: A glass of Tequila sunrise?
The answer:: Yes
Cocktail machine answer: Okay, please wait a moment.
After the cocktail is mixed, the machine will say: Master, please enjoy.
4.6.2: Voice command for serving a glass of "Orange juice":
Awakening Words: Cocktail Machine
Cocktail machine answer: Hey, I'm here.
Voice command Mix a glass of orange juice:
Cocktail machine Answer: Would you like to mix a glass of orange juice?
Affirmative: Yes:
Machine answer: Okay, please wait a moment.
After the drink is served, the Cocktail machine will answer: Master, please enjoy.
4.6.3: The clock
Wake-up words: Cocktail Machine
Cocktail machine will answer: Hey, I'm here.
Voice command: what time is it now:
Cocktail machine will answer: It's 11:20 now.
Technical parameters of the cocktail dispenser - JUNIOR
1. Dimensions: Diameter 315 mm, Height 395 mm
2. Weight: 4 kg
3. Voltage:AC100-250V 50/60Hz
4. Power: < 30W.
5. Lithium battery: 12V capacity 5500MAH
6. Function:
① It can be used through the control panel.
② Can be used by voice command.
7. Five different types of raw material;
8. Operating environment temperature: 2-45 ℃.
Phone no.: +4 0763 910 470
Email: office@drdrink.ro
ASK FOR DETAILS NOW
Contact us
We invite you to contact us by completing the form below at the details below. One of our colleagues will get back to you shortly.